High Security Full Automatic Retractable Bollards
Basic Info
Model No.: RS 1001
Product Description
High Security Full Automatic Retractable Bollards
Hydraulic Bollard Description
The wide range of RS-Series(Hydraulic Bollard) Bollards from RS Security Co.,Ltd provides a cost-effective solution for every site. The Automatic Bollard, Fixed Bollard,Hydraulic Bollard and much more, three versions of Bollards that are all engineered to meet international anti-ramming standards. Operated either pneumatically or hydraulically, the RS 1001 Series offers the highest standard of anti-ramming and security protection. Taking as little as 2 seconds to reach the fully raised position, these bollards can be used in the most demanding locations where high-volume traffic flows must be managed.
The Automatic Hydraulic Bollards is a retractable bollard, hydraulically powered barricade which has a lift height of 600mm.
Automatic Hydraulic Bollards provide automated heavy-duty vehicle access control and protection against ram-raiding. These units bridge the gap between Automatic Barriers
and Road Blockers in terms of security and cost.
100% duty rating - Automatic Bollards are designed for continuous and frequent use. Power requirement is supplied from a single phase 230v supply.
The Automatic Hydraulic Bollards can be interfaced to any access control systems. Traffic Light System included as standard on all automatic bollard systems.
Functions and Features :
1.Durable,Overload,Operate Smoothly,Low Noise,Fast speed up&down2.Micro-control technology makes bollards work stable and reliable,Easy integrate to other systems
3.Compatible with road barrier,Turnstiles and other access system control to achieve automatic control
4.Advanced Hydraulic pressure technologies
5.Remote control system realize wireless control up&down within 30 meters range
6.Customized for different users requests
7.Manual control hydraulic system devices
8.Swiping card system: built-in card reader to control bollards up&down
9.Road barrier integrate with Bollards : built-in access control realize road barrier,A/C and bollards in one-card
10.Connected with Computer Management OR Charging Systems
Hydraulic Bollard Details:
| Rating | K4/pas 68/iwa14:2013 (6.8 Ton Truck Impacted At 48 km) |
| Hydraulic Drive Unit | 420 V (Ac), 50 Hz |
| Unique Mechanism | In Built Tie Rod Mechanism |
| Protection Class | P 68 |
| Illumination | Red Led/ Reflective Bands |
| Duty Cycle | 100% |
| Operating Temperature | -25c To +60c |
| Manual Lowering Operations | Available |
| Cylinder Diameter | 223mm |
| Cylinder Length | 900mm |
| Model No. | RS 1001 |
| Cylinder Material | High Tensile Carbon Steel |
| Rising Time (Emergency) | 1~2sec or 3~5sec |
| Rising Lowering Time (Normal) | 3 Sec. |
Install micro hydraulic pressure into raising bollard .
Every bollard is a independent unit . Compare
central hydraulic system drive.It have those advantages :
1,No need lay underground hydraulic pipeline. Easy installation. Low construction cost
2,Because of Have no hydraulic pipeline. It only need inspect independent bollard during maintenance.
it is easy to take out the control box from earth .Easy repair and maintenance
System takes of micro motor and a integration ports connect gear pump and oil box . Then use a all in
one hydraulic cylinder to built a complete micro hydraulic .use structure parts to install this system into
roadblock inner.In this way complete electronic energy >mechanical energy>hydraulic energy conversation process .totally reach micro .electronic.;liquidize integration
Hydraulic Bollard features :
(1) Emergency release ;
(2) There is no limited on distance between Independent bollard and control system
(3)Can make sure more than one bollard synchronous raise and fall
(4)Can takes of short/remote control and short swing card or long range radio swing card control .
(5)Can connect with PC reach sequencing control.Suitable for high frequency high safety requirement
place
Our Service
1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 8 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.
FAQ
Q1. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q2. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q3. How about your delivery time?
A: Generally, it will take 5 to 7 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
Product Categories : Bollard > Hydraulic Bollard